Investigation of Ergonomics Risk Factors for Musculoskeletal Disorders among Oil Palm Workers Using Quick Exposure Check (QEC)

摘要:

文章预览

Oil palm workers perform daily activities that exposed themselves to various ergonomics risk factors. To harvest oil palm fruits from tall trees, specific technique is required. To quantify the ergonomics risks factors, postural analysis was conducted using Quick Exposure Check (QEC) system. It was found oil palm workers were exposed to many postural problems while performing harvesting and collecting fresh fruit bunch (FFB) activities. However, to quantify the actual load, many limitations of the QEC have been revealed such the missing of legs assessment, the crude analysis for arm and shoulder, no pushing and pulling assessment and the biased may be existed due to the workers perception on the ergonomics factors. Thus, it can be concluded that QEC system was not suitable for conducting postural analysis during harvesting in oil palm plantation especially in tall trees due to the above limitations.

信息:

期刊:

编辑:

Rosnah Mohd Yusuff, Siti Anom Ahmad, Dian Darina Indah Daruis, Baba Md Deros and Siti Zawiah Md Dawal

页数:

103-109

DOI:

10.4028/www.scientific.net/AEF.10.103

引用:

E. H. Sukadarin et al., "Investigation of Ergonomics Risk Factors for Musculoskeletal Disorders among Oil Palm Workers Using Quick Exposure Check (QEC)", Advanced Engineering Forum, Vol. 10, pp. 103-109, 2013

上线时间:

December 2013

输出:

[1] N. Jaffar, A. H. Abdul-Tharim, I. F. Mohd-Kamar, N. S. Lop, A Literature Review of Ergonomics Risk Factors in Construction Industry, Procedia Engineering. 20 (2011) 89–97.

DOI: 10.1016/j.proeng.2011.11.142

[2] J. C. Davies, G. J. Kemp, S. P. Frostick, C. E. Dickinson, Manual handling injuries and long term disability, Safety Science. 41 (2003) 611–625.

DOI: 10.1016/s0925-7535(02)00016-4

[3] V. V. Khanzode, J. Maiti, P. K. Ray, Occupational injury and accident research: A comprehensive review, Safety Science. 50 (5) (2012) 1355–1367.

DOI: 10.1016/j.ssci.2011.12.015

[4] A. R. Jelani, A. R. Shuib, A. Hitam, J. Jamak, M. M. Noor, Hand-held mechanical cutter, MPOB Infomation Series. 180 (2003) 1–2.

[5] A. R. Jelani, A. Hitam, J. Jamak, M. Noor, Y. Gono, O. Ariffin, Cantas TM – A tool for the efficient harvesting of oil palm fresh fruit bunches, Journal of Oil Palm Research. 20 (2008) 548–558.

[6] J. Yoon, A. Shiekhzadeh, M. Nordin, The effect of load weight vs. pace on muscle recruitment during lifting, Applied Ergonomics. 43(6) (2012) 1044–50.

DOI: 10.1016/j.apergo.2012.03.004

[7] I. L. Janowitz, M. Gillen, G. Ryan, D. Rempel, L. Trupin, L. Swig, K. Mullen, R. Rugulies, P. D. Blanc, Measuring the physical demands of work in hospital settings: design and implementation of an ergonomics assessment, Applied Ergonomics. 37(5) (2006).

DOI: 10.1016/j.apergo.2005.08.004

[8] G. Li, P. Buckle, A practical method for the assessment of work-related musculoskeletal risks-Quick Exposure Check (QEC), Proceedings of the Human Factors and Ergonomics Society 42nd Annual Meeting. 2 (1998) 1351 -1355.

DOI: 10.1177/154193129804201905

[9] G. David, V. Woods, P. Buckle, D. Stubbs, Further development of the Quick Exposure Check (QEC), In: Ergonomics in the Digital Age. Proceedings of the XVth Triennial Congress of the International Ergonomics Association. (2003) 24-29, Seoul, Korea.

[10] G. David, V. Woods, G. Li, P. Buckle, The development of the Quick Exposure Check (QEC) for assessing exposure to risk factors for work-related musculoskeletal disorders, Applied Ergonomics. 39(1) (2008) 57–69.

DOI: 10.1016/j.apergo.2007.03.002

[11] P. Simonsson , R. Rwamamara, Ergonomic exposures from the usage of conventional and self compacting concrete, Proceeding for the 17th Annual Conference of the International Group for Lean Construction. (2009) 313–322.

[12] E. -P. Takala, I. Pehkonen, M. Forsman, G. -Å. Hansson, S. E. Mathiassen, W. P. Neumann, G. Sjøgaard, K. B. Veiersted, R. H. Westgaard, J. Winkel, Systematic evaluation of observational methods assessing biomechanical exposures at work, Scandinavian Journal of Work, Environment & Health. 36(1) (2010).

DOI: 10.5271/sjweh.2876

[13] G. Li , P. Buckle, Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods, Ergonomics. 42 (5) (1999) 674–695.

DOI: 10.1080/001401399185388

[14] A. Bell, An ergonomic analysis of vacuum cleaning tasks using observational risk assessment tools, University of Wollongong. (2008).

[15] M. Motamedzade, M. R. Ashuri, R. Golmohammadi, H. Mahjub, Comparison of ergonomic risk assessment outputs from rapid entire body assessment and quick exposure check in an engine oil company, Journal of Research in Health Sciences. 11(1) (2011).

[16] A. Bell, J. Steele, Risk of musculoskeletal injury among cleaners during vacuuming, Ergonomics. 55(2) (2012) 237–247.

DOI: 10.1080/00140139.2011.592605

[17] M. -È. Chiasson, D. Imbeau, K. Aubry, A. Delisle, Comparing the results of eight methods used to evaluate risk factors associated with musculoskeletal disorders, International Journal of Industrial Ergonomics. 42(5) (2012) 478–488.

DOI: 10.1016/j.ergon.2012.07.003

[18] S. Khosrawi, A. Rahimi, B. Vahdatpour, F. D. Skouie, O. Mashrabi, Work-related musculoskeletal disorders among cardiologist, Research Journal of Biological Sciences. 6(4) (2011)170–174.

[19] M. Mirmohamadi, J. N. Seraji, J. Shahtaheri, M. Lahmi, M. Ghasemkhani, Evaluation of risk factors causing musculoskeletal disorders using QEC method in a furniture producing unite, " Iranian Journal of Public Health. 33(2) (2004) 24–27.

[20] A. D. Nimbarte, Risk of neck musculoskeletal disorders among males and females in lifting exertions, International Journal of Industrial Ergonomics. (2013) 1–7.

DOI: 10.1016/j.ergon.2013.01.007

为了查看相关信息, 需 Login.