Research on Axis Piezoelectric Six-Component Force/Moment Sensor Clamp Device



The six-component force measurement and real-time force feedback is not only the basis of multi-equipment coordination of operational control and the force comply with the control, but also to develop the technical basis of the overloaded operators, equipment and other heavy equipment. This article designed a fastening device based on the swelling principle of surface friction, for the six-component force sensor with parallel axis rigid connection. Analysis the six-component force sensor measurement principle, study the blessing device dynamometer performance of six-component force sensor. Use the finite element software for modeling and simulation analysis of the structure. Design of the loading experiments, the experiments show that the fastening technology based on the principle of swelling of the surface friction, to solve the six-component force sensor axis fixed and force transmission, interference of swelling structure to the sensor calibration is relatively small, both achieve effective clamping, but also improves the transfer efficiency of the power flow. With good positioning, highly repetitive assembly and disassembly, convenient adjusting device, etc.




B. L. Liu, Minghai Yuan, Guorong Chen and Jun Peng




N. Xu et al., "Research on Axis Piezoelectric Six-Component Force/Moment Sensor Clamp Device", Applied Mechanics and Materials, Vols. 427-429, pp. 1217-1222, 2013


September 2013




* - 通讯作者

[1] Ying-jun Li, Gui-cong Wang, Jun Zhang, Zhen-yuan Jia. Dynamic Characteristics of Piezoelectric Six-dimensional Heavy Force/moment Sensor for Large-load Robotic Manipulator. Measurement 45 (2012) : 1114-1125.


[2] Ying-Jun Li, Jun Zhang, Zhen-Yuan Jia, Min Qian, Hanguang Li. Research on force sensing element's spatial arrangement of piezoelectric six-component force/torque sensor, 2009, 23(8):2687-2698. Mechanical Systems and Signal Processing.


[3] Ying-Jun Li, Jun Zhang, Zhen-Yuan Jia, Min Qian. A novel piezoelectric 6-component heavy force/moment sensor for huge heavy-load manipulator's gripper, 2009, 23, (5):Zhenyuan Jia, Yingjun Li, Jun Zhang, Min Qian, Wei Liu. Study on Parallel Axis Piezoelectric Six-component Force Sensor, Chinese Journal of Mechanical Engineering. 2010, 46(11): 62-68.


[4] Hongben Xu. Handbook of Machine Tool and Clamp Design. Liaoning Science and Technology Press. 2004. 3.

[5] Zhili Sun, Xingju Leng, Yangang Wei and Haiquan Zeng. Machine Design. Northeastern University Press. 2000. 9.

[6] Daxian Cheng. Machine Design Handbook (Connecting and Clamping). Chemical Industry Press. 2004. 1.