Dynamic Simulation Analysis of the Globoidal Indexing Cam Mechanism

摘要:

文章预览

A procedure for the dynamic simulation analysis of the globoidal indexing cam mechanism is presented. Fist of all, the 3D model of globoidal indexing cam mechanism is established. Then, the virtual model needed by ADAMS is directly achieved by converting the 3D assembly model through the interface of SimDesigner in CATIA. In ADAMS, the tendency curves of angle velocity, acceleration of the indexing plate and contact forces between the roller and cam are made by dynamic simulation. It is very obvious to see the influence of the thickness of preload plate and assembly error on the maximum acceleration of indexing disk from the simulation result, and it will contribute to the design and assembly the globoidal indexing cam mechanism.

信息:

编辑:

Zeyong Yin, Chengyu Jiang, Datong Qin, Peixin Qiao and Geng Liu

页数:

514-517

DOI:

10.4028/www.scientific.net/AMM.86.514

引用:

F. Xu and W. He, "Dynamic Simulation Analysis of the Globoidal Indexing Cam Mechanism", Applied Mechanics and Materials, Vol. 86, pp. 514-517, 2011

上线时间:

August 2011

作者:

输出:

价格:

$38.00

[1] H.A. Rothbart: Cam Design Handbook (McGraw-Hill, New York 2004).

[2] F. Xu: Journal of Mechanical Transmission Vol. 33 (2009), p.42.

[3] N.F. Xu and F. Xu: Journal of Light Industry Machinery Vol. 4 (2009), p.53.

[4] Y.S. Liu, W. He and X.F. Tang: Journal of Machine Tool and Automatic Manufacturing Tech- nique Vol. 6 (2004), p.36.

[5] J.J. Cao and N.M. Qi: Journal of Mechanical Design and Manufacturing Vol. 1 (2006), p.11.

[6] W. He, G.X. Peng and Y.P. Hu: Journal of Mechanical Engineering Vol. 11 (2000), p.33.

[7] MSC. Software Corporation: Using MSC. ADAMS Function Builder (MSC Software Corporation, Santa Ana, USA 2007).

[8] D.A. Sadowski and M.R. Grabau: 2004 Winter Simulation Conference (WSC'04) vol. 1(1999), p.57.

为了查看相关信息, 需 Login.