Experimental Preparation and Properties of Modified CNT Field Emitters for the Field Emission Display Panel



Carbon nanotube used as the cathode material, the diode-type field emission display panel was developed with low-cost screen-printing method and precise photolithography process. The modified CNT field emitter was fabricated for improving the field emission characteristic, and the detailed fabrication process was also presented. The indium-tin-oxide film on the cathode back-plane was divided to form the CNT cathode electrode, and the insulation slurry was screen-printed to form the insulation layer. Field emission characteristic of whole display device was measured. The sealed field emission display panel showed good emission properties and high display image brightness.




Xianghua Liu, Zhengyi Jiang and Jingtao Han




H. Li et al., "Experimental Preparation and Properties of Modified CNT Field Emitters for the Field Emission Display Panel", Advanced Materials Research, Vols. 148-149, pp. 1327-1330, 2011


October 2010




[1] P. S. Guo, T. Chen, Y. W. Chen, et al. Solid-state electronics. Vol. 52 (2008), p.877.

[2] Yukui Li, Changchun Zhu, Xinghui Liu. Diamond and related materials. Vol. 11(2002), p.1845.

DOI: https://doi.org/10.1016/s0925-9635(02)00171-1

[3] A. M. Fennimore, L. T. Cheng, D. H. Roach. Diamond and related materials. Vol. 17(2008), p. (2005).

[4] Taehong Kim, Sangjik Kwon, Hyonhee Yoon, et al. Colloids and surfaces A: physicochemical and engineering aspects. Vol. 313-314(2008), p.448.

DOI: https://doi.org/10.1016/j.colsurfa.2007.04.136

[5] S. Srividya, S. Gautam, P. Jha, et al. Vol. 256(2010), p.3563.

[6] D. Roy Mahapatra, N. Sinha, J. T. W. Yeow, et al. Applied surface science. Vol. 255(2008), p. (1959).

[7] Fan-guang Zeng, Chang-chun Zhu, Weihua Liu, et al. Microelectronics journal. Vol. 37(2006), p.495.

[8] Seungchul Kim, Eunae Cho, Seungwu Han, et al. Solid state communications. Vol. 149(2009), p.670.