Numerical Simulation Analysis of a New Pressured Multi-Branch Bored Pile

摘要:

文章预览

Pressured multi-branch bored pile is a new pile on the basis of squeezed branch reaming pile improved, it is a new pile technology focus on many advantages of the static pile, driven cast-in-place pile, belled pile and multi-branch bored pile. Pressured multi-branch bored pile has high bearing capacity, small settlement, cost-effective advantages of better. Numerical simulation of pressured double-branch pile on the vertical compression with ANSYS finite element analysis software obtained the alternate variation of the lateral friction and tip resistance of pile under the vertical load. Many branch of pile constitute multi-pivot friction and end-bearing pile, the bearing branch bear mainly bear vertical load, above branch force greater than the following branch. It is proposed recommended value about the vertical critical spacing of branch and the level spacing of pressured branch pile.

信息:

期刊:

编辑:

Chaohe Chen, Yong Huang and Guangfan Li

页数:

3167-3171

引用:

M. Y. Zhang et al., "Numerical Simulation Analysis of a New Pressured Multi-Branch Bored Pile", Advanced Materials Research, Vols. 243-249, pp. 3167-3171, 2011

上线时间:

May 2011

输出:

价格:

$38.00

[1] XU Zhi-jun, ZHANG Guo-dong. Design and engineering applications of new squeezed branch bored pile (2002).

[2] ZHANG Zhao-hui. Getting started with ANSYS engineering examples to improve. (2004).

[3] WANG Xu-cheng, SHAO Min. The basic principles of finite element method and numerical method [M]. Beijing: Tsinghua University Press, (1997).

[4] Rietveld, N. Ghosh. Response of single pile axial load in clay [A]. Third set translations of the foundation soils and foundation[C]. Beijing: China Architecture & Building Press, (1980).

从Crossref获取数据。
这可能需要一些时间来加载。