A Comparative Study of The Fatigue Behavior of SnAgCu and SnPb Solder Joints

摘要:

文章预览

Fatigue behaviors of 63Sn37Pb and two types of lead-free solder joints were compared using pseudo-power cycling testing method, which provides more realistic load cycling to solder joints than chamber cycling method does. Pseudo-power cycling test was performed in various temperature ranges to evaluate the shear strain effect. A nonlinear finite element model was used to simulate the thermally induced visco-plastic deformation of solder joint in BGA packages. The results revealed that lead free solder joints have a good fatigue property in the low temperature condition, where a small strain was induced. In the high temperature condition where a large strain was induced, however, lead contained solder joints have a longer fatigue life.

信息:

期刊:

编辑:

Young-Jin Kim, Dong-Ho Bae and Yun-Jae Kim

页数:

831-836

引用:

I. H. Kim et al., "A Comparative Study of The Fatigue Behavior of SnAgCu and SnPb Solder Joints ", Key Engineering Materials, Vols. 297-300, pp. 831-836, 2005

上线时间:

November 2005

输出:

价格:

$38.00

[1] IPC: A Guide for Assembly of Lead-Free Electronics Draft IV, IPC, Northbrook (2000), pp.1-21.

[2] Soldertec: Second European Lead-Free Soldering Technology Roadmap, Uxbridge (2003), pp.1-24.

[3] S.W.R. Lee, B.H.W. Lui and Y.H. Kong: Soldering and Surface Mount Technology Vol. 14 No. 3 (2000), pp.46-50.

[4] A. Syed: International Symposium on Advanced Packaging Materials (2001), pp.143-147.

[5] B.Z. Hong: InterSociety Conference on Thermal Phenomena (1998), pp.205-211.

[6] A. Schubert, R. Dudek, H. Walter, E. Jung, A. Gollhardt, B. Michel and H. Reichl: ECTC (2002), pp.1246-1255.

[7] R.R. Tummala, E.J. Rymaszewski and A.G. Klopfenstein: Microselectronics Packaging Handbook, Part I, 2nd edtition (Chapman & Hall, New York 1997).

[8] T.S. Park: M.S. thesis, MME98037, KAIST, Korea (1998).

[9] B.Z. Hong: InterSociety Conference on Thermal Phenomena (1998), pp.205-211.

[10] J. Lau, W. Dauksher and P. Vianco: ECTC (2003), pp.229-236.

[11] S.Y. Yang, I.H. Kim, S.B. Lee: IEEE Transactions on Advanced Packaging, submitted.

[12] S.Y. Yang, I.H. Kim, S.B. Lee: SEM 2004, paper number 478.

[13] I.H. Kim : M.S. thesis. MME04018, KAIST, Korea (2004).