A Study on the Surface Characteristics with the Vibration Factor in the Micro-Machine

摘要:

文章预览

In conventional machining, cutting conditions such as cutting speed, feed rate, and depth of the cut have great influence on the surface roughness. In micro machining, however, the surface shape is affected by not only the machining parameters mentioned earlier but also tool stiffness, system stability, and workpiece properties caused by the miniatured structure and cutting tool. Especially, in a micro-machine system, the difference between the cutting forces in the recursive cuts introduces the vibration easily. A high spindle causes instability of the system, increases the temperature in the cutting process, and also changes the tool’s shape. This study introduces a method to predict the surface shape of the workpiece based on the machining conditions in micro milling. The micro-milled surfaces in different machining conditions are predicted by a computer simulation including the vibration model and the simulated results show good agreement with the experimental results.

信息:

期刊:

编辑:

Seung-Seok Lee, Joon Hyun Lee, Ik Keun Park, Sung-Jin Song, Man Yong Choi

页数:

1605-1608

DOI:

10.4028/www.scientific.net/KEM.321-323.1605

引用:

J. M. Kin et al., "A Study on the Surface Characteristics with the Vibration Factor in the Micro-Machine", Key Engineering Materials, Vols. 321-323, pp. 1605-1608, 2006

上线时间:

October 2006

输出:

价格:

$38.00

[1] M. C. Shaw: Metal cutting Principles (Clarendon press, Arizona, 1981).

[2] M.S. Hong and K.F. Ehmann: NAMRC Vol. 18, (1999), p.222.

[3] H. Q. Zheng, et al: Int. J. of Machine Tools & Manufacture Vol. 39 (1999), p. (2003).

[4] S. Engin and Y. Altintas: Int. J. of Machine Tools & Manufacture Vol. 41 (2001), p.2195.

[5] M.S. Hong: Proc. of the KSMTE Spring Conference (2002), p.

为了查看相关信息, 需 Login.