Research on Fatigue S-N Curves of Corrosion-Damaged Reinforcement

摘要:

Article Preview

Three corrosion degrees of reinforcement are chosen in this paper, which are considered to simulate minor, medium and severe degrees of corrosion in this field. A reinforcement mass loss about 5% is used to define a minor degree of corrosion, whereas mass losses about 10% and 20% are used to define medium and severe degree of corrosion, respectively. Fifteen specimens of the three corrosion degrees and seven uncorroded specimens are tested under fatigue. According to the results of the fatigue tests, using stress range as fatigue parameter and 50% as guaranteed probability, the fatigue S-N curves of the four different corrosion degrees of deformed reinforcement adaptable for fatigue reliability evaluation are put forward. These curves provide necessary principle for predicting the residual fatigue lives of aged existing reinforced concrete bridges.

信息:

期刊:

编辑:

M.H. Aliabadi, Qingfen Li, Li Li and F.-G. Buchholz

页数:

607-610

DOI:

10.4028/www.scientific.net/KEM.324-325.607

引用:

H. W. Tang et al., "Research on Fatigue S-N Curves of Corrosion-Damaged Reinforcement", Key Engineering Materials, Vols. 324-325, pp. 607-610, 2006

上线时间:

November 2006

输出:

价格:

$35.00

为了查看相关信息, 需 Login.

为了查看相关信息, 需 Login.