Improvement of Surface Texture of Stainless Steel by Utilizing Dry Blasting - 3rd Report: Effect of Blasted Texture on Adhesion of Plating -

摘要:

文章预览

Recently, wet blasting is generally used such as liquid honing and water jet machining in surface before plating of stainless steel. The outstanding feature of wet blasting is to prevent generation of static electric charge, to use micro abrasive grain, and to have cushioning for workpiece. On the other hand, the disadvantage of wet blasting is to generate corrosion of equipment and liquid waste under processing. Moreover, the using abrasive grain is available on a limited basis. In particular, improvement disposal of liquid waste under processing is crucial in the near future. This paper makes proposal for improvement of surface texture by utilizing dry blasting, and it conducts improvement of surface texture about martensite stainless steel (SUS420J2 In JIS), which is used in material for scale. In the previous report, it has been cleared that relationship between surface texture and wettability. In this report, adhesion of plating was measured by scratch test. As a result, it was cleared that availability of adhesion evaluation by utilizing wettability.

信息:

期刊:

编辑:

Dongming Guo, Tsunemoto Kuriyagawa, Jun Wang and Jun’ichi Tamaki

页数:

353-358

引用:

K. Minaki et al., "Improvement of Surface Texture of Stainless Steel by Utilizing Dry Blasting - 3rd Report: Effect of Blasted Texture on Adhesion of Plating -", Key Engineering Materials, Vol. 329, pp. 353-358, 2007

上线时间:

January 2007

输出:

价格:

$38.00

[1] K. Kitajima, Processing technology data files: Japan Society for the Promotion of Machine Industry, (2002), p.194.

[2] M. Hirose: Method and effect of shot peening, Nikkan industry, (1997), p.37.

[3] K. Minaki, et al.: Improvement of Surface Texture of Stainless Steel by Utilizing Dry Blasting, Proc of the 7th International Symposium on Advances in Abrasive Technology, Turkey, (2004), pp.519-524.

[4] K. Minaki, et al.: Improvement of Surface Texture of Stainless Steel by Utilizing Dry Blasting -2 nd report: Effect of blasting conditions on wettability-, Key Engineering Materials Vols. 291-292, (2005), pp.265-270.

DOI: https://doi.org/10.4028/www.scientific.net/kem.291-292.265

[5] H. Ichimura: Base and application of thin film, Nikkan industry, (2005), pp.156-157.

[6] A. Kinpara: Thin film, Japanese Standards Association, (1991), pp.164-165.

[7] P. Benjamin and C. Weaver: Measurement of Adhesion of Thin Films, Proc. R. Soc. London, A(1960), p.163.

[8] K.L. Johnson, K. Kendall and A.D. Roberts: Surface energy and the contact of elastic solids, Proc� Royal Society of London A324(1971), p.301�.

[9] Edited by Metal Finishing Society: Coating technology, Asakura books, (1969).