A Finite Element Analysis of the Thermo-Hydro-Mechanically Coupled Problem of a Cohesive Deposit Using a Thermo-Elasto-Viscoplastic Model

摘要:

文章预览

We propose a thermo-hydro-mechanically coupled finite element analysis method for clay with a thermo-elasto-viscoplastic model. The volume changes in soil particles and pore fluids are introduced into the analysis method. The instability of the problem is studied and a numerical simulation of the thermal consolidation is presented using the newly developed analysis method. It was confirmed that the analysis method can reproduce the thermal consolidation phenomenon well.

信息:

期刊:

编辑:

N. Ohno and T. Uehara

页数:

1291-1296

引用:

S. Kimoto et al., "A Finite Element Analysis of the Thermo-Hydro-Mechanically Coupled Problem of a Cohesive Deposit Using a Thermo-Elasto-Viscoplastic Model", Key Engineering Materials, Vols. 340-341, pp. 1291-1296, 2007

上线时间:

June 2007

输出:

价格:

$38.00

[1] Boudali, M., Leroueil, S., and Srinivasa, Murthy, B.R.: Viscous behaviour of natural clays, Proc. 13th Int. Conf. on SMFE, New Delhi, India, pp.411-416, (1994).

[2] Yashima, A., Leroueil, S., Oka, F. and Guntoro, I., Modelling temperature and strain rate dependent behavior of clays: one dimensional consolidation, Soils and Foundations, Vol. 38, No. 2, pp.63-73, (1998).

DOI: https://doi.org/10.3208/sandf.38.2_63

[3] Kimoto, S , Oka, F. and Higo, Y., Strain localization analysis of elasto-viscoplastic soil considering structural degradation, Int. J. Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issues 27-29, pp.2845-2866, (2004).

DOI: https://doi.org/10.1016/j.cma.2003.09.017

[4] Campanella, R.G. and Mitchell, J.K.: Influence of temperature variations on soil behavior, ASCE J. of SMFE, Vol. 94, No. 3, pp.709-734, (1968).

[5] Baldi, G., Hueckel, T., and Pellegrini, R.: Thermal volume change of the mineral-water system in low-porosity clay soils, Canadian Geotechnical Journal, Vol. 25, pp.807-825, (1988).

DOI: https://doi.org/10.1139/t88-089

[49] 65.

[38] 10.

[26] 55.

[15] 00 1 hour 4 hours 40 hours 144 hours.

[63] 01.

[42] 00.

[21] 00.

00 1 hour 4 hours 40 hours 144 hours (℃) (kPa).