Creep Curve Modeling of Hastelloy-X Alloy by Using the Nonlinear Regression Method in the Kachanov-Rabotnov Creep Model

摘要:

文章预览

To design HTGR components for up to 1000oC, their creep curves are necessary during a design process. In this study, the full creep curves were modeled by the nonlinear least square fitting method using the Kachanov-Rabotnov (K-R) creep model. A series of creep data was obtained experimentally under various stress levels for Hastelloy-X at 950oC, and the data was used to model the creep curves. The K-R model gave a poor description of modeling creep curves, but the modified K-R one, which has another variable, K in the K-R model, was in better agreement than the K-R one. It was found that the λ parameter in the K-R model was constant regardless of the stress variations. The λ value was about 3.9 for the K-R model and about 5.8 for the modified one.

信息:

期刊:

编辑:

S.W. Nam, Y.W. Chang, S.B. Lee and N.J. Kim

页数:

589-592

引用:

W. G. Kim et al., "Creep Curve Modeling of Hastelloy-X Alloy by Using the Nonlinear Regression Method in the Kachanov-Rabotnov Creep Model ", Key Engineering Materials, Vols. 345-346, pp. 589-592, 2007

上线时间:

August 2007

输出:

价格:

$38.00

[1] W.G. Kim, S.N. Yin, W.S. Ryu and J.H. Chang: Key Eng. Materials, Vols. 326-328 (2006) p.1105.

[2] K. Maruyama, C. Harada, H. Oikawa: J. Soc. Mater. Sci., Japan, Vol. 34(1985), p.1289.

[3] W.G. Kim, S.H. Kim, and W.S. Ryu: KSME Internal Journal, Vol. 16 (2002), p.420.

[4] R.K. Penny and D.L. Marriott: Design for Creep, Chapman & Hall (1995).

[5] R.K. Penny: J. Metals and Materials, Vol. 8 (1974), p.278.

[6] F. Garofalo: Fundamentals of Creep and Creep Rupture in Metals, Macmillan Co., NY(1966).

[7] R. Viswanathan: Damage Mechanisms and Life Assessment of High-Temperature Components, ASM International (1989).

[8] L.D. Blackburn: American Society of Mechanical Engineers, NY(1972), p.14.

[9] R.W. Evans, J. D. Parker and B. Wilshire: Int. J. of PVP, Vol. 50 (1992), p.147.

[10] W.G. Kim, S. H. Kim and W.S. Ryu: KSME International Journal, Vol. 15(2001), p.1463.