p.689

p.693

p.697

p.701

p.705

p.709

p.713

p.717

p.721

# Fracture Analysis for Damaged Aircraft Fuselage Subjected to Blast

## 摘要:

This paper primarily presents the development and application of automation computational analysis techniques to determine the dynamic stress intensity factor for the damaged aircraft fuselage subjected to triangle blast load. A program based on automated procedure to simulate cracked fuselage is developed. It may create 3-dimention panel model using parameterization. The stress around the crack tips will be captured and the dynamic stress intensity factor can be obtained at every moment of the blast automatically. A typical curved panel model which consists of 7 frames and 8 stringers is calculated. The calculation results shown that the form of the dynamic SIF curve is similar to that of the triangle load curve while the peak point of dynamic SIF curve occurs a little later than that of the load curve due to the inertia effect. The longer the crack is, the more obvious the effect is. The peak SIF value of the crack under blast load is bigger than that under the static load for certain crack length. The longer the crack is, the bigger the difference between the dynamic peak SIF value and static SIF is. At the same time, the load time has effect on the dynamic SIF curve and its peak value. These results show good agreements with theoretical principles.

## 信息:

期刊:

编辑:

J. Alfaiate, M.H. Aliabadi, M. Guagliano and L. Susmel

页数:

705-708

引用:

J. S. Ju et al., "Fracture Analysis for Damaged Aircraft Fuselage Subjected to Blast ", Key Engineering Materials, Vols. 348-349, pp. 705-708, 2007

上线时间:

September 2007

价格:

$38.00

允许: