Effects of Sintering Additives on Properties of Porous Silicon Nitride Ceramics Fabricated by Carbothermal Reduction

摘要:

文章预览

In this paper, porous Si3N4 ceramics were fabricated by carbothermal reduction between silicon dioxide and carbon. The influences of four types of sintering additives on the microstructure and mechanical properties of the porous Si3N4 ceramics were investigated. XRD analysis proved complete formation of a single-phase β-Si3N4. SEM analysis showed that the resultant porous Si3N4 ceramics occupied fine microstructure and a uniform pore structure. The sintered sample with Lu2O3 as sintering additive showed finer, a higher aspect ratio β-Si3N4 grains. The addition of Eu2O3 accelerated the densification of porous Si3N4 ceramics, decreased the porosity and increased the flexural strength.

信息:

期刊:

编辑:

Wei Pan and Jianghong Gong

页数:

878-880

DOI:

10.4028/www.scientific.net/KEM.368-372.878

引用:

Y. Lu et al., "Effects of Sintering Additives on Properties of Porous Silicon Nitride Ceramics Fabricated by Carbothermal Reduction", Key Engineering Materials, Vols. 368-372, pp. 878-880, 2008

上线时间:

February 2008

输出:

价格:

$35.00

[1] S. -Y. Shan, J. -F. Yang and Y. Lu: Scripta Materialia Vol 56 (2007), p.193.

[2] J. Yang, J. -F. Yang and S. -Y. Shan: J. Am. Ceram. Soc. Vol. 89 (2006), p.3843.

[3] S. -Y. Shan, J. -F. Yang and J. -Q. Gao: J. Am. Ceram. Soc. Vol. 88 (2005), p.2594.

[4] J. -F. Yang, S. -Y. Shan: Acta Mater, Vol. 53(2005), p.2981.

[5] R.L. Coble and W.D. Kingery: J. Am. Ceram. Soc, Vol 39(1956), p.377 Fig. 2 SEM patterns of porous Si3N4 ceramics with different sintering additives.

为了查看相关信息, 需 Login.