Electrodeposition of Aluminum on 316L Stainless Steel from Molten Salts Based on Chlorides

摘要:

文章预览

The electrodeposition of aluminum on 316L stainless steel from a molten salts based on chloride has been studied. The surface morphology of the aluminum layer has been examined through scanning electron microscope (SEM) and the structure of the aluminum layer has been analyzed by X-ray diffraction (XRD). The thickness of the deposited aluminum layer has been measured by the method of cross-section scan. It has been suggested that a white, smooth, non-porous and a high purity aluminum layer can be obtained on 316L stainless steel from the ternary chloride molten salts (AlCl3 – NaCl - KCl). And the structure of the aluminum layer was single-phase.

信息:

期刊:

编辑:

M.K. Lei, X.P. Zhu, K.W. Xu and B.S. Xu

页数:

273-276

引用:

Y. J. Wang et al., "Electrodeposition of Aluminum on 316L Stainless Steel from Molten Salts Based on Chlorides", Key Engineering Materials, Vols. 373-374, pp. 273-276, 2008

上线时间:

March 2008

输出:

价格:

$38.00

[1] Q. X. Liu, S. Zein El Abedin, F. Endres: Surf. Coat. Technol. Vol. 201 (2006), p.1352.

[2] M PAUČÍROVÁ and K MATIAŠOVSKÝ: Electrodeposition Surf. Treat. Vol. 3 (1975), p.121.

[3] G. R. Stafford, B. Grushko, R. D. McMichael: J Alloys Compd. Vol. 200(1993), p.107.

[4] T. P. Moffat: J Electrochem Soc Vol. 141, (1994), p.115.

[5] T. P. Moffat: J Electrochem Soc Vol. 141, (1994), p.3059.

[6] M. Ueda, D. Susukida, S. Konda, T. Ohtsuka: Surf. Coat. Technol. Vol. 176 (2004), p.202.

[7] S. P Sun, Y. B. Yin, Z. W. Wang, J. Li, B. L Gao, Z. X. Qin: J Northeastern University (natural science) Vol. 21 (2000), p.66.

[8] M. Galova: Surf. Technol. Vol. 11 (1980), p.357.

[9] Y. Zhao and T. J. VanderNoot: Electrochim. Acta Vol. 42 (1997), p.3.

[10] B. NAYAK, M. M. MISRA: J. Appl. Electrochem Vol. 9 (1976), p.699.

[11] Q. Y. Feng, Z. M. Ding, L. S. Jia, J. S. Guan: Mater. Prot Vol. 37 (2004), p.1.

[12] J. H. Wang, X. Yang, M. F. Wang. Ordnance Mater. Sci. Eng. Vol. 29 (2005), pp.1-90 Fe Al Intensity, a. u. 2 θ , degree a) 10 20 30 40 50 60 70 80 90 Fe Al Intensity, a. u. 2 θ , degree b).