Roll Casting of Three Layers Clad Strip

摘要:

文章预览

A roll caster, which could cast the three layers of clad strip directly from the molten metal, was designed, assembled and tested. The base strip was AA3003 aluminum alloy and overlay strips were AA4045 aluminum alloy. An unequal diameter twin roll caster was modified to cast clad strip. Two small rolls were amounted on a large roll. A scraper plate was used to prevent the mixture of the different kinds of melts. The casting of three strips and the connecting of strips could be operated by one roll caster. The interfaces between the strips were clear, and the mixture of the melt did not occur. The clad strip could be cold rolled without the annealing. The clad strip did not peel at connecting surface by the cold rolling and continuous bending. The strips were connected strictly. The casting speed was 20m/min, and this speed was much higher than the casting speed of the conventional twin roll caster for aluminum alloys.

信息:

期刊:

编辑:

Jun Wang,Philip Mathew, Xiaoping Li, Chuanzhen Huang and Hongtao Zhu

页数:

128-133

DOI:

10.4028/www.scientific.net/KEM.443.128

引用:

R. Nakamura et al., "Roll Casting of Three Layers Clad Strip", Key Engineering Materials, Vol. 443, pp. 128-133, 2010

上线时间:

June 2010

输出:

价格:

$38.00

[1] T. haga and S. Suzuki: Mater.J. Mater. Process. Technol. Vol. 138 (2003), p.366.

[2] T. haga, M. Ikawa, H. Watari and S. Kumai: J. Mater. Process. Technol. Vol. 172 (2006), p.271.

[3] T. haga, H. Inui, H. Watari and S. Kumai: Solid State Phenomena, Vol. 116-117(2006), p.379.

[4] T. haga, T. Asai, H. Watari and S. Kumai: Solid State Phenomena, Vol. 141-143(2008), p.295.

DOI: 10.4028/www.scientific.net/ssp.141-143.295

[5] T. haga, H. Inui, H. Watari and S. Kumai: Archives of Mater. Sci. & Eng. Vol. 29(2008), p.113.

[6] T. Haga, M. Sawai, R. Nakamura, H. Watari and S. Kumai: Mater. Sci. Forum Vol. 633-642 (2010), p.413.

[7] N. Toyama, H. Aho, H. Arai, H. Yoshimura, Tetsu-to-Hagane, Vol. 71(1986)p. A245. upper surface upper surface 10㎜ lowerer surface 10㎜ lowerer surface 10㎜ upper surface lowerer surface (b) Excellent 10㎜ (a) Blister as cast strip cold rolled strip.

为了查看相关信息, 需 Login.