High Pressure Wear Characteristics of Alloyed Ductile Cast Iron - Effect of Cu, Mn, Si and Mo

摘要:

文章预览

Under a high-pressure condition, the wear characteristics of alloyed and unalloyed ductile cast iron were investigated. Mn, Cu, Si and Mo were chosen as alloying elements, and their effects on mechanical properties of hardness and toughness were correlated with wear properties. In most cases, high-pressure wear of alloyed and unalloyed DCI were sequentially developed by mild wear region followed by severe wear. The transition of wear mode was indicated by the drastic increase of friction coefficient and wear rate. The observation of worn surface at mild-wear region suggested that wear had been concentrated at graphite phases, whereas severe wear mode damaged both of graphite and matrix. It was found that DCI alloyed with Si-Mo exhibited the most prominent resistance to the beginning of severe wear while the toughness of DCI was also a crucial factor.

信息:

期刊:

主题:

编辑:

Z.Y. Zhong, H. Saka, T.H. Kim, E.A. Holm, Y.F. Han and X.S. Xie

页数:

4223-4226

DOI:

10.4028/www.scientific.net/MSF.475-479.4223

引用:

W. H. Bang et al., "High Pressure Wear Characteristics of Alloyed Ductile Cast Iron - Effect of Cu, Mn, Si and Mo", Materials Science Forum, Vols. 475-479, pp. 4223-4226, 2005

上线时间:

January 2005

输出:

价格:

$35.00

[1] C.R. Loper and J.Y. Park: Met. Mater. -Int. Vol 9 (2003), p.327.

[2] C.F. Walton and J.T. Opar: Iron Castings Handbook (Iron Castings Society, Ohio 1981).

[3] A.F. Spengler: The Ductile Iron Process (Miller and Company, Illinois 1982).

[4] I. Jarudi and L.C. Zhang: J. Mater. Sci. Vol. 37 (2002), p.3935.

[5] A.D. Sarkar: Friction and Wear (Academic Press, New York 1980).

[6] S.C. Lim and M.F. Ashby: Acta Metall. Vol. 35 (1997). P. 1.

[7] D.H. Yang, Q.J. Xue, X.S. Zhang and H.Q. Wang: Wear Vol. 173 (1994), p.129.

为了查看相关信息, 需 Login.