The Development of New Al-Mg-Si Alloys for Thixoforming

摘要:

文章预览

Al-Mg-Si based alloys have been developed to produce an advanced feedstock material for thixoforming. Effects of excess Si, Mn addition and deformation on microstructure evolutions during reheating and partial remelting were studied. The homogenized microstructures of the Mnadded Al-Mg-Si alloys consist of the Al12Mn3Si2 intermetallic compound along grain boundaries of equiaxed grains with fine-spherical and needle-like morphologies. The deformation by cold-rolling has a strong effect on the semi-solid microstructures of the Mn-added Al-Mg-Si alloys compared with the balanced and excess Si alloys. The Mn-added Al-Mg-Si alloys exhibit good features to produce the feedstock material for thixoforming.

信息:

期刊:

编辑:

W.J. Poole, M.A. Wells and D.J. Lloyd

页数:

377-382

引用:

W. Eidhed et al., "The Development of New Al-Mg-Si Alloys for Thixoforming", Materials Science Forum, Vols. 519-521, pp. 377-382, 2006

上线时间:

July 2006

输出:

价格:

$38.00

[1] D. B Spencer, R. Mehrabian, M.C. Flemings, Metall. Trans 3 (1976) (1925).

[2] D.H. Kirkwood, Int. Mater. Rev. 39 (1994) 173.

[3] Q. Pan, D. Apelian, Quantitative microstructure characterization of commercial semi-solid aluminum alloys, in: proceeding of the Seventh International Conference on Semi-solid Processing of Alloys and Composite, Tsukuba, Japan, 2002, pp.483-488.

[4] S. Engler, D. Hartmann, I. Niedick, Alloy development for automotive application, in: proceeding of the Sixth International Conference on Semi-solid Processing of Alloys and Composite, Turin, Italy, 2000, pp.483-488.

[5] S. Yong Lee and S. Il Oh, J. Mater. Proc. Tech, 130 (2002) 587.

[6] D. Liu, H.V. Atkinson, P. Kapranos, W. Jiratticharoean, H. Jones, Mater. Sci. Eng A361 (2003) 213.

[7] H.E. Pitts, H.V. Atkinson, Thixoforming of 6061 Al alloy for automotive components, in: proceeding of the Fifth International Conference on Semi-solid Processing of Alloys and Composite, Colorado, USA, 1998, pp.97-104.

[8] G.C. Gullo, K. Steinhoff, P.J. Uggowitzer, Microstructural changes during reheating of semisolid alloy AA6082, modified with barium in: proceeding of the Sixth International Conference on Semi-solid Processing of Alloys and Composite, Turin, Italy, 2000, pp.367-372.