Manufacturing and Analysis of Mechanical Properties of Superalloy 718 in Hydraulic Forging

摘要:

文章预览

Alloy 718 ingot with a diameter of 400mm was made by the vacuum melting process ; VIM followed by VAR. Compression tests were conducted on samples collected from columnar zone of the VIM/VAR-processed Alloy 718 ingot in wide temperature and strain rate ranges, i.e. 750~1,200OC and 10~0.001s-1 in order to understand the deformation behavior and evolution of microstructure. Tensile tests at high temperature were also conducted on samples in temperature ranges, i.e. 750~1,100OC. Effects of process parameters on the flow behavior as well as on the microstructure evolution during compression tests at high temperatures are considered. As a result of the deformation simulation, The VIM/VAR ingot was heat-treated for homogenization, and casting structure of the ingot was broken down for uniform microstructures and mechanical properties by controlled cogging process using a hydraulic press. The observation of the microstructure and grain size distribution was carried out to evaluate the effects of optimum process parameters during cogging and mechanical property tests were performed in this study.

信息:

期刊:

主题:

编辑:

T. Chandra, K. Tsuzaki, M. Militzer , C. Ravindran

页数:

3124-3129

引用:

Y. S. Song et al., "Manufacturing and Analysis of Mechanical Properties of Superalloy 718 in Hydraulic Forging", Materials Science Forum, Vols. 539-543, pp. 3124-3129, 2007

上线时间:

March 2007

输出:

价格:

$38.00

从Crossref获取数据。
这可能需要一些时间来加载。