Effect of Ozone Treatment on the Interfacial Properties of High Modulus Carbon Fiber/Epoxy Composites

摘要:

文章预览

High modulus carbon/epoxy composites have been attached more and more importance in the aeronautic field. Because chemical inert of high modulus carbon fiber surface and its poor impregnation for resin, it is essential to improve its polarity in order to enhance the interfacial performances of high modulus carbon/epoxy composites. In this paper, high modulus carbon fiber was treated by ozone oxidation method to modify its surfacial properties. AFM and SEM were used to observe the surface of the carbon fiber, as well as interlaminar shear strength of high modulus carbon fiber/epoxy composite was tested. The impregnation and the interfacial performances of the high modulus carbon/epoxy composites were studied. The results show that after ozone treatment, the surface impregnation of high modulus carbon fiber and the interlaminar shear strength property of high modulus carbon/epoxy composites can be improved obviously.

信息:

期刊:

编辑:

Yafang Han et al.

页数:

1547-1550

引用:

X. J. Zhao et al., "Effect of Ozone Treatment on the Interfacial Properties of High Modulus Carbon Fiber/Epoxy Composites", Materials Science Forum, Vols. 546-549, pp. 1547-1550, 2007

上线时间:

May 2007

输出:

价格:

$38.00

[1] V. Bellenger, J Decelle, N. Huet. Composites Part B: Engineering Vol. 36(2005), p.189.

[2] Kim Jin Kook, Lee Dai Gil. Journal of Adhesion Science and Technology Vol. 17(2003), p.1017.

[3] Montagnier, C. Hochard. Journal of Composite Materials Vol. 39(2005), p.35.

[4] S. David, S. Kirk, S.A. Emmett, R. Sami. Transportation Research Record, Vol. 1892(2004), p.237.

[5] Z. Jin, Z. Q Zhang, L. H Meng. Materials Chemistry and Physics Vol. 97(2006), p.167.

[6] K. R Ko, S. K Ryu, S. J Park. Carbon vol. 42(2004), p.1864.

[7] H. J. Fu, Y. D. Huang, L. Liu. Materials Science and Technology Vol. 20(2004), p.1655.