On the Conflicts in the Experimental Results Concerning the Mechanical Properties of Ultra-Fine Grained and Nanostructured Materials: Effects of Processing Routes and Experimental Conditions

摘要:

文章预览

Different routes of severe plastic deformation (SPD) processing employed for the production of ultrafine grained and nanostructured materials are identified. The structural changes accompanying SPD that lead to improved mechanical properties are noted. Some uncertainties associated with the processing, which cause variations in the mechanical properties, are highlighted. Special attention is paid to equi-channel angular pressing/ extrusion, high pressure torsion, accumulative roll bonding/fold - roll processing, reciprocating extrusion – compression, cyclic close die forging, and repetitive corrugation and straightening- processes many of which can be adapted to suit standard metal working equipment, fitted with inexpensive devices and tools. The conflicting observations on the mechanical properties of ultrafine grained and nanostructured materials are discussed.

信息:

期刊:

编辑:

Yonghao Zhao

页数:

3-54

DOI:

10.4028/www.scientific.net/MSF.683.3

引用:

K. A. Padmanabhan and S. B. Prabu, "On the Conflicts in the Experimental Results Concerning the Mechanical Properties of Ultra-Fine Grained and Nanostructured Materials: Effects of Processing Routes and Experimental Conditions", Materials Science Forum, Vol. 683, pp. 3-54, 2011

上线时间:

May 2011

输出:

价格:

$35.00

[1] B.B. Straumal, B. Baretzky, A.A. Mazilkin, F. Philipp, O.A. Kogtenkova, M.N. Volkov and R.Z. Valiev: Acta Mater. Vol. 52 (2004), p.4469.

[2] C.C. Koch: Journal of Non-Crystalline Solids, Vol. 117-118, Part 2, (1990), p.670.

[3] K.A. Padmanabhan: Mater. Sci. Eng. A, Vol. 304-306(2001), p.200.

[4] H. Gleiter: Prog. Mater. Sci., Vol. 33, Issue 4(1989), p.223.

[5] H. Gleiter: Mater. Sci. Eng. A, Vol. 52, Issue 2(1982), p.91.

[6] R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci. Vol. 51 (2006), p.881.

[7] M. Eizadjou, H. Danesh Manesh and K. Janghorban: J. Alloys Compd., Vol. 474, Issues 1-2 (2009), p.406.

[8] G. Wilde, N. Boucharat, R. Hebert, H. Roesner and R. Valiev: Mater. Sci. Eng. A, Vol. 449–451 (2007), p.825.

[9] K.J. Kurzydlowski, H. Garbacz and M. Richert: Rev. Adv. Mater. Sci. Vol. 8 (2004), p.129.

[10] R.Z. Valiev, A.V. Korznikov and R.R. Mulyukov: Mater. Sci. Eng. A, Vol. 168, No. 2(1993), p.141.

[11] A. Azushima , R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche, J. Yanagimoto , N. Tsuji , A. Rosochowski and A. Yanagida: CIRP Annals - Manufacturing Technology, Vol. 57, Issue 2(2008), p.716.

DOI: 10.1016/j.cirp.2008.09.005

[12] P.B. Prangnell and J.R. Bowen, P.J. Apps: Mater. Sci. Eng. A, Vol. 375–377 (2004), p.178.

[13] X. Huang, G. Winther, N. Hansen, T. Hebesberger, A. Vorhauer, R. Pippan and M.J. Zehetbauer: Mater. Sci. Forum, Vol. 426 (2003), p.2819.

DOI: 10.4028/www.scientific.net/msf.426-432.2819

[14] J. Zrnik and S. V. Dobatkin, I. Mamuzi: Metalurgija, Vol. 47, No. 3 (2008), p.211.

[15] B.B. Straumal, B. Baretzky, A.A. Mazilkin, F. Phillipp, O.A. Kogtenkova, M.N. Volkov and R.Z. Valiev: Acta Materialia, vol. 52 (2004), p.4469.

DOI: 10.1016/j.actamat.2004.06.006

[16] M. Czepelak, M. Staszewski, A. Wrona, M. Lis and M. Osadnik: Archives of Materials Science and Engineering, Vol. 30, Issue 2(2008), p.109.

[17] D. Ehre, E.Y. Gutmanas and R. Chaim: J. Eur. Ceram. Soc. Vol. 25 (2005), p.3579.

[18] L. Gao, J.G. Li, T. Kusunose and K. Niihara: J. Eur. Ceram. Soc. Vol. 24 (2004), p.381.

[19] L. Carroll, M. Sternitzke and B. Derby: Acta Mater. Vol. 44 (1996), p.4543.

[20] C.E. Borsa, N.M.R. Jones, R.J. Brook and R.I. Todd: J. Eur. Ceram. Soc. , Vol. 17 (1997), p.865.

[21] H.Z. Wang, L. Gao and J.K. Guo: Ceram. Int., Vol. 26 (2000), p.391.

[22] T. Sekino, T. Nakajima and K. Niihara: Mater. Lett., Vol. 29 (1996), p.165.

[23] N. Bamba, Y.H. Choa, T. Sekino and K. Niihara: J. Eur. Ceram. Soc., Vol. 18 (1998), p.693.

[24] S.T. Oh, M. Sando, T. Sekino and K. Niihara : Nanostruct. Mater., Vol. 10 (1998), p.267.

[25] D.S. Cheong, K.T. Hwang and C.S. Kim: Composite A, Vol. 30 (1999), p.425.

[26] R. Zhou, Z. Feng, Y. Liang, F. Zheng and Q. Xian: Ceram. Int., Vol. 27 (2001), p.571.

[27] H.Z. Wang, L. Gao and J.K. Guo: J. Eur. Ceram. Soc., Vol. 19 (1999), p.2125.

[28] C.J. Lin, C.C. Yang and W.C.J. Wei: Nanostruct. Mater., Vol. 11 (1999), p.1361.

[29] J. Hu, T.W. Odom and C.M. Lieber: Acc. Chem. Res., Vol. 32 (1999), p.435.

[30] Z.L. Zhao, Y. Zhao, Y. Niu, C.L. Wang and W.T. Wu: J. Alloys Compd., Vol. 307 (2000), p.254.

[31] W.P. Tai, Y.S. Kim and J.G. Kim: Mater. Chem. Phys., Vol. 82 (2003), p.396.

[32] J.G. Li, L.A. Gao and J.K. Guo: J. Eur. Ceram. Soc., Vol. 23 (2003), p.69.

[33] Z. Horita and T. G. Langdon: Scr. Mater., Vol. 58, Issue 11(2008), p.1029.

[34] J. Sort, D. C. Ile, A. P. Zhilyaev, A. Concustell, T. Czeppe, M. Stoica, S. Suriñach, J. Eckert, M. D. Baró: Scr. Mater., Vol. 50 (2004), p.1221.

DOI: 10.1016/j.scriptamat.2004.02.004

[35] E. Bonetti, L. Pasquini and E. Sampaolesi: NanoStruct. Mater., Vol. 9 (1997), p.611–614.

[36] X.K. Sun, H.T. Cong, M. Sun and M.C. Yang: Metall. Mater. Trans. A , Vol. 31A (2000), p.1017.

[37] R.W. Hayes, D. Witkin, F. Zhou and E.J. Lavernia: Acta Mater., Vol. 52 (2004), p.4259.

[38] S.H. Ko, J.M. Jang and W. Lee: Mater. Sci. Forum, Vol. 475–479 (2005), p.3489.

[39] A. Abdul-Latif, G.F. Dirras, S. Ramtani and A. Hocini: International Journal of Mechanical Sciences, Vol. 51 (2009), p.797.

[40] Akhtar S. Khan, B. Farrokh and L. Takacs: Mater. Sci. Eng. A, Vol. 489 (2008), p.77.

[41] Y. Todaka, M. Umemoto, J. Yin, Z. Liu and K. Tsuchiya: Mater. Sci. Eng. A, Vol. 462 (2007), p.264.

[42] Y. Beygelzimer: Mechanics of Materials, Vol. 37 (2005), p.753.

[43] V. M. Segal, USSRPatent No. 575892(1977).

[44] V.M. Segal: Mater. Sci. Eng. A, Vol. 271 (1999), p.322.

[45] R. Z. Valiev, R. K. Islamgaliev and I. V. Alexandrov: Prog. Mater. Sci., Vol. 45, Issue 2(2000), p.103.

[46] R.Z. Valiev, R.R. Mulyukov and V.V. Ovchinnikov: Philos. Mag. Lett., Vol. 62(1990), p.253.

[47] Y. Saito, N. Tsuji, H. Utsonomiya, T. Sakai and R.G. Hong: Scr. Mater., Vol. 39 (1998), p.1221.

[48] A.K. Gosh, U.S. Patent 4, 721, 537, January 26, (1988).

[49] J. Y. Huang, Y. T. Zhu, H. Jiang and T. C. Lowe: Mater. Sci. Eng. A, Vol. 49, No. 9(2001), p.1497.

[50] H. Petryk and S. Stupkiewicz: Mater. Sci. Eng. A, Vol. 444 (2007), p.214.

[51] A. Ma, N. Saito, M. Takagi, Y. Nishida, H. Iwata, K. Suzuki, I. Shigematsu and A. Watazu: Journal of Mater. Sci. Eng. A, Vol. 395, Issue 1-2, (2005), p.70.

[52] H. V. Swygenhoven and J. R. Weertman: Materials today, Vol. 9, No. 5 (2006), p.24.

[53] I. Gutierrez-Urrutia, M.A. Munoz-Morris and D.G. Morris: Mater. Sci. Eng. A, Vol. 394 (2005), p.399.

[54] G. Zhao, S. Xu, Y. Luan, Y. Guan, N. Lun and X. Ren: Mater. Sci. Eng. A, Vol. 437, Issue 2, ( 2006), pp.281-292.

[55] M. Kai, Z. Horita and T. G. Langdon : Mater. Sci. Eng. A, Vol. 488 (2008), p.117.

[56] M.A. Munoz-Morris, C.G. Oca and D.G. Morris : Scripta Mater., Vol. 48 (2003), p.213.

[57] K A Padmanabhan, R A Vasin and F U Enikeev: Superplasic Flow- Phenomenology and Mechanics, Springer, Berlin, (2001).

[58] K. A. Padmanabhan and S. Balasivanandha Prabu, Proc. Int. Symp. on Emerging Challenges for Metals and Materials: Engineering andTechnology", Indian Institute of Metals, Kolkata, Allied Publishers, New Delhi, November 15, 2009, p.163.

[59] K. Venkateswarlu, M. Ghosh, A.K. Ray, C. Xu and T. G. Langdon: Mater. Sci. Eng. A, Vol. 485 (2008), p.476.

[60] T.L. Tsai, P.L. Sun, P.W. Kao and C.P. Chang: Mater. Sci. Eng. A, Vol. 342 (2003), p.144.

[61] J. -Y. Chang and A. Shan: Mater. Sci. Eng. A, Vol. 347 (2003), p.165.

[62] O.V. Mishin, D.J. Jensen and N. Hansen: Mater. Sci. Eng. A , Vol. 342 (2003), p.320.

[63] M.J. Starink, N. Gao, M. Furukawa, Z. Horita, C. Xu, and T.G. Langdon: Rev. Adv. Mater. Sci., Vol. 7(2004), p.1.

[64] C. Xu, M. Furukawa, Z. Horita and T.G. Langdon: Mater Sci. Eng. A, Vol. 398 (2005), p.66.

[65] N. Gao, M.J. Starink, M. Furukawa, Z. Horita, C. Xu and T.G. Langdon: Mater. Sci. Eng. A, Vol. A410–A411 (2005), p.303.

[66] S.C. Wang, M.J. Starink, N. Gao, C. Xu and T.G. Langdon: Rev. Adv. Mater. Sci., Vol. 10(2005), p.249–55.

[67] S.G. Chowdhury, C. Xu and T.G. Langdon: Mater. Sci. Eng. A, Vol. 473 (2008), p.219–25.

[68] L.J. Zheng, C.Q. Chen, T.T. Zhou, P.Y. Liu and M.G. Zeng: Mater. Charact., Vol. 49(2003), p.455.

[69] Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev and Y.T. Zhu: Acta Mater., Vol. 52(2004), p.4589–99.

[70] G. Sha, Y.B. Wang, X.Z. Liao, Z.C. Duan, S.P. Ringer and T.G. Langdon: Acta Mater., Vol. 57(2009), p.3123.

[71] J. Gubicza, I. Schiller, N.Q. Chinh, J. Illy, Z. Hegedu¨s and T.G. Langdon: Mater. Sci. Eng. A, Vol. 460–461 (2007), p.77.

[72] N.Q. Chinh, J. Gubicza, T. Czeppe, J. Lendvai, C. Xu, R.Z. Valiev and T.G. Langdon: Mater. Sci. Eng. A, Vol. 516(2009), p.248–52.

[73] N.Q. Chinh, J. Gubicza, T. Czeppe, J. Lendvai, Z. Horita, C. Xu and T.G. Langdon: Mater. Sci. Forum, Vol. 584–586(2008), p.501.

[74] W.J. Kim, C.W. An, Y.S. Kim and S.I. Hong: Scripta Mater. Vol. 47 (2002), p.39.

[75] D.H. Shin, I. Kim, J. Kim and Y.T. Zhu, Mater. Sci. Eng. A, Vol. 334 (2002), p.239.

[76] V.V. Stolyarov, Y.T. Zhu, T.C. Lowe, R.K. Islamgaliev and R.Z. Valiev: Nanostructured Materials, Vol. 11, No. 7(1999), p.947.

[77] H. -K. Kim, M. -I. Choi, C. -S. Chung and D.H. Shin: Mater. Sci. Eng. A, Vol. 340 (2003), p.243.

[78] D.H. Shin, J-J. Park, S.Y. Chang, Y. -K. Lee and K. -T. Park: ISIC Int. Vol. 42 (2002), p.1490.

[79] H.S. Kim, S.I. Hong, Y. S. Lee, A.A. Dubravina and I. V. Alexandrov: J. Mater. Process. Technol. Vol. 142 (2003), p.334.

[80] A. Vinogradov, V. Patlan, Y. Suzuki, K. Kitagawa and V.I. Kopylov: Acta Mater. Vol. 50 (2002), p.1639.

[81] T. Yamasaki, H. Miyamoto, T. Mimaki, A. Vinogradov and S. Hashimoto: Mater. Sci. Eng. A, Vol. 318 (2001), p.122.

[82] K. Neishi, T. Uchida, A. Yamauchi, K. Nakamura, Z. Horita and T.G. Langdon: Mater. Sci. Eng. A, Vol. 307 (2001), p.23.

[83] A.P. Zhilyaev, G.V. Nurislamova, B.K. Kim, M.D. Baro, J.A. Szpunar and T.G. Langdon: Acta Mater. Vol. 51 (2003), p.753.

DOI: 10.1016/s1359-6454(02)00466-4

[84] G. Purcek: J. Mater. Process. Technol. Vol. 169 (2005), p.242.

[85] C.Y. Nam, J.H. Han, Y.H. Chung and M.C. Shin: Mater. Sci. Eng., 2003, vol. A347, p.253.

[86] Z.C. Duan, N.Q. Chinh, C. Xu and T. G. Langdon: Metallurgical and Metallurgical and Materials Transactions A, Vol. 41A (2010), p.802.

[87] H. S. Kim, M.H. Seo and S.I. Hong: Mater. Sci. Eng. A, Vol. 291, Issues 1-2(2000), p.86.

[88] T. G. Langdon: Mater. Sci. Eng. A, Vol. 462 (2007), p.3.

[89] V.M. Segal: Mater Sci Eng A, Vol. 197(1995), p.157.

[90] Y. Iwahashi, J. Wang, Z. Horita. M. Nemoto and T.G. langdon: Scripta Mater. Vol. 35(1996), p.143.

[91] H.S. Kim: J. Mater. Process. Technol., Vol. 113 (2001), p.617.

[92] J-Y. Suh, H-S. Kim, J-W. Park and J-Y. Chang: Scripta Mater, Vol. 44 (2001), p.677.

[93] K. IL Moon, H.S. Park and K.S. Lee: J. Alloys Compd. Vol. 325 (2001), p.236.

[94] S.L. Semiatin, D.P. Delo and E.B. Shell: Acta Mater, Vol. 48(2000), p.1841.

[95] W. Wei, A.V. Nagasekhar, G. Chen, Y.T. Hon and K. X. Wei: Scr. Mater. Vol. 54 (2006), p.1865.

[96] C.J.L. Perez: Scr. Mater. Vol. 50 (2004), p.387.

[97] I. Gutierrez-Urrutia, M.A. Muñoz-Morris and D.G. Morris: Acta Materialia, Vol. 55 (2007), p.1319.

[98] C. Xu, T.G. Langdon: Scr. Mater. Vol. 48 (2003), p.1.

[99] S.H. Kang, Y.S. Lee and J.H. Lee: J. Mater. Process. Technol. Vol. 201, Issue 1-3(2008), p.436.

[100] P.B. Prangnell, J.R. Bowen and P.J. Apps: Mater. Sci. Eng. A, Vol. 375-377 (2004), p.178.

[101] P.B. Prangnell, C. Harris and S.M. Roberts: Scripta Mater, Vol. 37, Issue 7(1997), p.983.

[102] Y.Y. Lang and L. Shyong: J Mater Process Technol, Vol. 140 (2003), p.583.

[103] S. Li, M.A.M. Bourke, I.J. Beyerlein, D.J. Alexander and B. Clausen: Mater Sci Eng A, Vol. 382 (2004), p.217.

[104] S. Dumoulin, H.J. Roven, J.C. Werenskoid and H.S. Valberg: Mater Sci Eng A, Vol. 410–411(2005), p.248.

[105] S. Suo, L. Yulong, G. Yazhou and L. Yuangyong: Mater Sci Eng A, Vol. 432 (2006), p.269–74.

[106] M.S. Joun, H.G. Moon, I.S. Choi, M.C. Lee and B.Y. Jun: Tribol Int., Vol. 42(2009), p.311.

[107] H.S. Kim: Mater. Sci. Eng. A, Vol. 315 (2001), p.122.

[108] V.M. Segal: Mater. Sci. Eng. A, Vol. 345 (2003), p.36.

[109] G. Zhao, S. Xu, Y. Luan, Y. Guan, N. Lun and X. Ren: Mater. Sci. Eng. A, Vol. 437 (2006), p.281.

[110] S.M. Masoudpanah and R. Mahmudi: Materials and Design, Vol. 31, No. 7 (2010), p.3512.

[111] Y. Iwahashi, Z. Horita, M. Nemoto and T.G. Langdon: Acta Mater., Vol. 46, No. 9(1998), p.3317.

[112] Ta. Suo, Y. Li, Q. Deng and Y. Liu: Mater. Sci. Eng. A, Vol. 466 (2007), p.166.

[113] S.H. Kang, Y.S. Lee and J.H. Lee: J. Mater. Process. Technol., Vol. 201, Issue1-3 (2008), p.436.

[114] V. N. Chuvildeev, V. I. Kopylov, A. V. Nokhrin, I. M. Makarov, and Yu. G. Lopatin: Doklady Physics, Vol. 49, No. 5(2004) p.296–302.

[115] A. Yamashita, D. Yamaguchi, Z. Horita and T.G. Langdon: Mater. Sci. Eng. A, Vol. 287 (2000), p.100.

[116] O. Sitdikov, T. Sakai, E. Avtokratova, R. Kaibyshev, Y. Kimura and K. Tsuzaki: Mater. Sci. Eng. A, Vol. 444 (2007), p.18.

[117] O.S. Sitdikov, R.O. Kaybyshev, I.M. Safarov and I.A. Mazurina: Phys. Met. Metallogr. 92 (2001) 270–280.

[118] S. Li, A.A. Gazder, I.J. Beyerlein, C.H.J. Davies and E.V. Pereloma: Acta Materialia, Vol. 55, Issue 3(2007), p.1017.

[119] M.A. Mu˜noz-Morris, I. Gutierrez-Urrutia and D.G. Morris: Mater. Sci. Eng. A, Vol. 396 (2005), p.3.

[120] P B. Berbon, T.G. Langdon, N.K. Tsenev, R.Z. Valiev, M. Furukawa and Z. Horita: Metall Mater Trans A, Vol. 29(1998), p.2237.

[121] D.H. Shin, I. Kim, J. Kim and K-T. Park: Acta Materialia, Vol. 49 (2001), p.1285.

[122] C.W. Su, L. Lu and M.O. Lai: Mater. Sci. Eng. A, Vol. 434 (2006), p.227.

[123] A.H. Chokshi, A. Rosen, J. Karch and H. Gleiter: Scr. Metall., Vol. 23 (1989), p.1679.

[124] H. Hahn and K.A. Padmanabhan: Philos Mag B, Vol. 71 (1997), p.1652.

[125] G.P. Dinda, H. Roesner and G. Wilde: Scripta Mater., Vol. 52 (2005), p.577.

[126] D. Wolf, V. Yamakov, S.R. Phillpot and A.K. Mukherjee: Z. Metallkd. Vol. 94 (2003), p.1091.

[127] B.Q. Han, E.J. Lavernia and F.A. Mohamed: Rev. Adv. Mater. Sci., Vol. 9 (2005), p.1.

[128] K.S. Kumar, S. Suresh, M.F. Chisholm, J.A. Horton and P. Wang: Acta Materialia, Vol. 51 (2003), p.5743.

[129] I. Kim, J. Kim, D.H. Shin, C.S. Lee and S.K. Hwang: Mater. Sci. Eng. A, Vol. 342 (2003), p.302.

[130] M.A. Meyers, A. Mishra and D.J. Benson: JOM, Vol. 58 (2006), p.41.

[131] G. Purcek, B.S. Altan, I. Miskioglu and P. H. Ooi: J. Mater. Process. Technol., Vol. 148(2004), p.279.

[132] Z.A. Khan, U. Chakkingal and P. Venugopal: J. Mater. Process. Technol., Vol. 135 (2003), p.59.

[133] B. Cherukuri, T.S. Nedkova and R. Srinivasan: Mater. Sci. Eng. A, Vol. 410 (2005), p.394.

[134] R. Kapoor, C. Gupta, G. Sharma and J.K. Chakravarty: Scr. Mater., Vol. 53 (2005), p.1389.

[135] Y.W. Tham, M.W. Fu, H.H. Hng, M.S. Yong and K.B. Lim: J. Mater. Process. Technol., Vol. 192–193 (2007), p.575.

[136] D. Farkas, S. Mohanty and J. Monk: Mater. Sci. Eng. A, Vol. 493, Issues 1-2(2008), p.33.

[137] Z. Horita, T. Fujinami, M. Nemoto and T.G. Langdon: J. Mater. Process. Technol., Vol. 117 (2001), p.288.

[138] Y. Miyahara, K. Matsubara, Z. Horita and T.G. Langdon: Metallurgical and Materials Transactions A, Vol. 36A (2005), p.1705.

[139] A.V. Nagasekhar, U. Chakkingal and P. Venugopal: Journal of Manufacturing Processes, Vol. 8, Issue 2(2006), p.112.

[140] S. Xu, G. Zhao, X. Ma and G. Ren: J. Mater. Process. Technol., Vol. 184, Issue 1-3, (2007), p.209.

[141] B.S. Altan, G. Purcek and I. Miskioglu: J. Mater. Process. Technol., Vol. 168 (2005), p.137.

[142] A. Azushima, R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche , J. Yanagimoto, N. Tsuji, A. Rosochowskij and A. Yanagida: CIRP Annals - Manufacturing Technology, Vol. 57, Issue 2(2008), p.716.

DOI: 10.1016/j.cirp.2008.09.005

[143] V. V. Stolyarov, Y. T. Zhu, T. C. Lowe, R. K. Islamgaliev and R. Z. Valiev: Mater. Sci. Eng. A, Vol. 282, Issue1-2 (2000), p.78.

[144] M. T. Perez-Prado, A.A. Gimazov, O.A. Ruano, M.E. Kassner and A.P. Zhilyaev: Scr. Mater., Vol. 58 (2008), p.219.

[145] Z. Yang and U. Welzel: Mater Lett. Vol. 59 (2005), p.3406.

[146] M.J. Zehetbauer, J. Kohout, E. Schafler, F. Sachslehner and A. Dubravina: J. Alloy. Compd., Vol. 378 (2004), p.329.

[147] A. Vorhauer and R. Pippan: Scr. Mater. Vol. 51 (2004), p.921.

[148] G. Khatibi, J. Horky, B. Weiss and M.J. Zehetbauer: International Journal of Fatigue, Vol. 32 (2010), p.269–278.

[149] A.P. Zhilyaev, B.K. Kim, J.A. Szpunar, M.D. Baro and T.G. Langdon: Mater. Sci. Eng. A, Vol. 391 (2005), p.377.

[150] A.P. Zhilyaev, A.A. Gimazov, G.I. Raab and T.G. Langdon: Mater. Sci. Eng. A, Vol. 486, Issue 1-2(2008), p.123.

[151] A.A. Mazilkin, B.B. Straumal, E. Rabkin, B. Baretzky, S. Enders, S.G. Protasova, O.A. Kogtenkova and R.Z. Valiev: Acta Mater. Vol. 54 (2006), p.3933.

DOI: 10.1016/j.actamat.2006.04.025

[152] Z. Horita and T.G. Langdon : Mater Sci Eng. A, Vol. 410–411(2005), p.422.

[153] X. Sauvage and Y. Ivanisenko : J. Mat. Sci. Vol. 42 (2007), p.1615.

[154] R.K. Islamgaliev, V.U. Kazyhanov, L.O. Shestakova, A.V. Sharafutdinov and R.Z. Valiev : Mater. Sci. Eng. A, Vol. 493, 1-2(2008), p.190.

[155] P. W. Bridgman: Physical Review, Vol. 48 (1935), p.825.

[156] S.V. Dobatkin, E.N. Bastarache, G. Sakai, T. Fujita, Z. Horita and T.G. Langdon: Mater. Sci. Eng. A, Vol. 408, Issues 1-2(2005), p.141.

[157] T. Hebesberger, H.P. Stuwe, A. Vorhauer, F. Wetscher and R. Pippan: Acta Materialia, Vol. 53 (2005), p.393.

DOI: 10.1016/j.actamat.2004.09.043

[158] G. Sakai, K. Nakamura, Z. Horita and T. G. Langdon: Mater. Sci. Eng. A, Vol. 406 (2005), p.268.

[159] C. Xu, Z. Horita and T.G. Langdon: Acta Materialia, Vol. 55 (2007), p.203.

[160] V. Viswanathan, T. Laha, K. Balani, A. Agarwal and S. Seal: Mater. Sci. Eng. R, Vol. 54 (2006), p.121.

[161] S. -C. Liao, K.D. Pae and W.E. Mayo: Nanostruct. Mater. Vol. 8 (1997), p.645.

[162] S.C. Liao, Y.J. Chen, W.E. Mayo and B.H. Kear: Nanostruct. Mater. Vol. 11 (1999), p.553.

[163] S.C. Liao, K.D. Pae and W.E. Mayo: Mater. Sci. Eng. A, Vol. 204 (1995), p.152.

[164] W.J. Kim and J.C. Namkung: Mater. Sci. Eng. A, Vol. 412 (2005), p.287.

[165] T. Tokunaga, K. Kaneko, K. Sato and Z. Horita: Scr. Mater. Vol. 58, Issue 9(2008), p.735.

[166] I. Sabirov, O. Kolednik, R.Z. Valiev and R. Pippan: Acta Mater. Vol. 53 (2005), p.4919.

[167] A.R. Yavari, W.J. Botta Filho, C.A.D. Rodrigues, C. Cardoso and R.Z. Valiev: Scr. Mater. Vol. 46 (2002), p.711.

[168] A.A. Popov, I.Y. Pyshmintsev, S.L. Demakov, A.G. Illarionov, T.C. Lowe, A.V. Sergeeva and R.Z. Valiev: Scr. Mater. Vol. 37 (1997), p.1089.

[169] Z.Q. Yang: Materials Letters, Vol. 60, Issues 29-30(2006), p.3846.

[170] M. Kawazoe, T. Shibata, T. Mukai and K. Higashi: Scr. Mater. Vol. 36 (1997), p.699.

[171] R.Z. Valiev, Y.V. Ivanisenko, E.F. Rauch and Baudelet: Acta Mater. Vol. 44 (1996), p.4705.

[172] A.P. Zhilyaev, S. Lee, G.V. Nurislamova, R.Z. Valiev and T.G. Langdon: Scripta Mater., Vol. 44 (2001), p.2753.

[173] G.K. Williamson and R.E. Smallman: Philos. Mag., Vol. 1 (1956), p.34.

[174] E. Schafler and M.B. Kerber: Mater. Sci. Eng. A, Vol. 462 (2007), p.139.

[175] T. Hebesberger, H.P. Stüwe, A. Vorhauer, F. Wetscher and R. Pippan: Acta Materialia, Vol. 53, Issue 2(2005), p.393.

DOI: 10.1016/j.actamat.2004.09.043

[176] Q.F. Wang, X.P. Xiao, J. Hu, W.W. Xu, X.Q. Zhao and S.J. Zhao: Proceedings of Sino-Swedish Structural Materials Symposium 2007, p.167.

[177] P.A. Friedman and A.K. Gosh: Metall. Mater. Trans., 27A(1996), p.3827.

[178] R.S. Mishra and Z.Y. Ma: Materials Science and Engineering R, Vol. 50 (2005), p.1.

[179] K A Padmanabhan and G J Davies: Superplasticity, Springer, Berlin, (1980).

[180] I.V. Alexandrov and R.Z. Valiev: Scripta mater., Vol. 44 (2001), p.1605.

[181] N. Lugo, N. Llorca, J.M. Cabrera and Z. Horita: Mater. Sci. Eng. A, Vol. 477, 1-2(2008), p.366.

[182] M. Kai, Z. Horita and T.G. Langdon: Mater. Sci. Eng. A, Vol. 488, Issue. 1-2 (2008), p.117.

[183] T. Hanlon, Y. -N. Kwon and S. Suresh: Scr. Mater., Vol. 49 (2003), p.675.

[184] Y. Estrin, G. Gottstein, E. Rabkin and L.S. Shvindlerman: Scr. Mater., Vol. 43 (2000), p.141.

[185] S.C. Yoon, P. Quang, S.I. Hong and H.S. Kim: J. Mater. Process. Technol., Vol. 187–188 (2007), p.46.

[186] H.W. Höppel, M. Prell, L. May and M. Göken: International Journal of Fatigue, Vol. 28 (2006), p.1001.

[187] K.R. Sriraman, S. Ganesh Sundara Raman, S.K. Seshadri: Materials Letters, Vol. 61 (2007), p.715.

[188] H. Mughrabi and H. W. Höppel: International Journal of Fatigue, Vol. 32, Issue 9(2010), p.1413.

[189] Y. Estrin and A. Vinogradov: International Journal of Fatigue, Vol. 32 (2010), p.898.

[190] L.J. Chen, C.Y. Ma, G.M. Stoica, P.K. Liaw, C. Xu and T.G. Langdon: Mater. Sci. Eng. A, Vol. 410–411 (2005), p.472.

[191] S. Balasivanandha Prabu, D. Gokulnath, N.R. Parthasarathi and K. A. Padmanabhan: unpublished work, (2010).

[192] J. Huanga, Y.T. Zhu, D.J. Alexander, X. Liao, T.C. Lowe and R.J. Asaro: Mater. Sci. Eng. A, Vol. 371 (2004), p.35.

[193] M. Kazeminezhad and E. Hosseini, Materials and Design, Vol. 31 (2010), p.94.

[194] M. Eizadjou, A.K. Talachi, H.D. Manesh, H.S. Shahabi and K. Janghorban: Comp. Sci. and Tech, Vol. 68 (2008), p. (2003).

[195] B. Cherukuri, T.S. Nedkova and R. Srinivasan, Mater. Sci. Eng. A, Vol. 410–411 (2005), p.394.

[196] S.H. Lee, Y. Saito, T. Sakai and H. Utsunomiya: Mater. Sci. Eng. A, Vol. 325 (2002), p.228.

[197] M.T. Pe´rez-Prado, J.A. del Valle and O.A. Ruano: Scr. Mater., Vol. 51 (2004), p.1093.

[198] M. Zhan, Y. Li and W. Chen: Trans. Nonferrous Met. Soc., China, Vol. 18(2008), p.309.

[199] N. Tsuji, Y. Saito, H. Utsunomiya and S. Tanigawa: Scr. Mater., Vol. 40, No. 7(1999), p.795.

[200] S.A. Hosseini and H.D. Manesh: Materials and Design, Vol. 30 (2009), p.2911.

[201] A.K. Padap, G.P. Chaudhari, V. Pancholi and S.K. Nath: Materials and Design, Vol. 31 (2010), p.3816.

为了查看相关信息, 需 Login.