Influence of Axial Length on Axially Compressed Aluminum Polygonal Tube

摘要:

文章预览

Aluminum tubes are efficient energy absorbing components and are widely used in the automobile industry. In the previous report, the authors investigated the influence of cross-sectional shape on axially compressed aluminum tube by numerical analysis. However, there are only a few reports on length of aluminum tube. This paper deals with the influence of axial length and reinforcing rib on dynamic axially compressed aluminum polygonal tube in order to obtain the basic data of buckling and impact resistance. A numerical analysis of the dynamic deformation process of the polygonal tube was made with a finite element method. The result shows that even if the axial length was changed, there was no difference in the trend of the load-displacement curve in each cross-sectional shape. However, the maximum load part on load-displacement curve was changed. The buckling was generated partially and the deformation was larger at the corners in each axial length and cross-sectional shape.

信息:

期刊:

编辑:

Peng Wan Chen and Qiang Zhou

页数:

117-122

引用:

K. Yokoya et al., "Influence of Axial Length on Axially Compressed Aluminum Polygonal Tube", Materials Science Forum, Vol. 910, pp. 117-122, 2018

上线时间:

January 2018

输出:

价格:

$38.00

* - 通讯作者

[1] W. Abramowicz and N. Jones, International Journal Impact Engineering. 2-2 (1984) 179-208.

[2] M. Yamashita, M. Gotoh and Y, Sawairi, Journal of Materials Processing Technology. 140 (2003) 59–64.

[3] X. W. Zhang, H. Su and T. X. Yu, International Journal of Impact Engineering. 36 (2009) 402–417.

[4] X. Zhang, Z. Wen and H. Zhang, Thin-Walled Structures. 84 (2014) 263–274.

[5] D. Karagiozova, International Journal of Impact Engineering. 30 (2004) 143–166.

[6] Q. Meng, S.T.S. Al-Hassani and P.D. Soden, International Journal of Mechanical Sciences. 25 (1983) 747–773.

[7] D-K. Kim, S. Lee and M. Rhee, Materials & Design. 19 (1998) 179-185.

[8] M. Miyazaki and H. Negishi, Materials Transactions. 44 (2003) 1566-1570.

[9] M. Miyazaki and H. Negishi, Proceedings of the 53rd Japanese Conference for the Technology of Plasticity. 53 (2002) 83-84.

[10] M. Miyazaki and M Yamaguchi, Procedia Engineering. 81 (2014) 1067-72.

[11] S. Tanimura, Proceedings of the International Symposium on Impact Engineering. 1 (1992) 17-26.